DuroMax XP4400E 4,400 Watt 7.0 HP OHV 4-Cycle Gas Powered Portable Generator With Wheel Kit And Electric Start

Product Details

• 4400 Watt Rise/3500 Watt Continuous
• 4 Gallon Gas Tank/8 Hour Run Formerly
• Self-governing Low Oil Shut Off
• EPA Approved
• Stirring Key Start/Includes Battery

Product Description

DuroStar DS4000S 4,000 Watt 7.0 HP OHV 4-Cycle Gas Powered Portable Generator

Product Details

• 4000 Watt Ebb/3300 watt continuous
• Inevitable low oil shut off
• EPA Approved
• EZ-Root for a drive up recoil start
• 4 Gallon gas tank/8 hour run together

Product Description

DuroMax XP10000E 10,000 Watt 16 HP OHV 4-Cycle Gas Powered Portable Generator With Wheel Kit And Electric Start

Product Details

• 10000 Watt Stream/8000 Watt Continuous
• Automated Low Oil Shut Off
• 8.3 Gallon Gas Tank
• EPA Approved
• Stirring Key Start/Includes Battery

Product Description

Moeller DuraMax Flo n' Go LE Fluid Transfer Pump and 14-Gallon Rolling Gas Can

Product Details

• Comes with MaxFlo Siphon Inspirit with at-the-handle pump control allows for auto-fasten-off and restarts and clean, hassle-free siphon lead
• Wheeled for unhurried transportation, high density polypropelyne for dent, corrosion and rust refusal
• Complete for industrial, commercial and recreational applications
• 10 foot hose with two keep in-off valves , at both the thank and the hose connector make the hoes undisturbed to disconnect for refilling and transportation
• Use on dismount attack commercial equipment, farms, landscape crews, dockside and shack applications

Product Description

The tank includes a sizable 14-gallon/53-liter genius and a 10-foot-long fuel hose, as well as a gulp down-on hanger for convenient hose storage. And users will sweetie the sturdy 6-inch wheels, which makes it a lead-pipe cinch to maneuver the tank over rough terrain. Other features number an ergonomically designed, heavy-duty top deal with with extra-deep base unit handholds for happiness; a UL-approved mechanically vented fill cap; and recessed grooves that present nuisance-free strapping locations for safer enrapture. The Flo 'n' Go fluid transfer pump meets all DOT and UN transportation requirements.

Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine

Product Details

• Unmanageable-duty construction with 100% duty cycle, fully-enclosed appliance design, large battery, rugged electrical connections
• Secondary power while welding provides the capability to run other equipment (lights, grinder) at the same at the same time
• Four 120 volt (20 amp), one 240V (50 amp), and one 120/240 volt (50 amp) receptacles with shoulder-button reset
• No tools oil shift and standard hour meter to help maintain uninteresting scheduled oil servicing
• Auto-shiftless for greater fuel savings and reduced noise

Product Description

Genesis GMT15A Multi-Purpose Oscillating Tool

Product Details

• 21000 oscillations per wink for fast sanding, grinding, cutting, and scraping
• 4-pin flange proposal holds accessories firmly in place
• Multifunctional means for home repair, remodeling, and restoration
• Includes 3-inch Delta sanding pad, sandpaper, scraping dagger, 30 mm E-cut saw blade, HSS segment saw blade, and allen rip
• Stout die-cast aluminum gear housing

Product Description

GMT15A Multi-Purpose Oscillating Tool At a Scintillation: Multi-purpose tool for home renovation and remodeling; attachments included for cutting, scraping, and sanding 21,000 oscillations per one sec; 1.5 amps Four-pin flange holds accessories immovably in place Die-cast aluminum gear dwelling for increased life Two-year warranty; fellow service and technical support included

A experienced power tool for home repair and remodeling. Expectation larger.

Attachments for a Variety of Projects
Contrastive with traditional power saws, the Genesis GMT15A Multifunction Oscillating Gismo employs a 30-millimeter flush penetrating saw blade to make precise cuts along edges and in mean corners. You'll marvel at how easy it is to trim limited door jambs or base molding.

To prepare cut-outs in wood, plastic, or drywall, you'll be deficient in to use the 3-inch flat saw blade. The rigid scraper penknife makes pulling up old vinyl flooring or carpeting no unruly. The scraper also comes in handy for chipping away at bull-headed paint layers.

The Genesis GMT15A can also be utilized as a detail sander. Simply attach the hook-and-loop sanding pad and sandpaper for dry sanding of wood, chintzy, or metal surfaces. For additional options, a grout sword or flexible scraper blade can be attached (not included).

Lightweight and Great
Weighing less than four pounds, this lightweight tool is constructed using die-select aluminum gear housing, which improves dissolution of heat and increases service life. A four-pin flange form holds accessories firmly in place to obligation safety. And with speeds of up to 21,000 oscillations per summary, projects can be completed more efficiently.

UL listed, the Genesis GMT15A is rated at 1.5 amps and 120 volts for risk-free, reliable operation. It is backed by a two-year promise, which includes complimentary toll-free chap service and technical support. The GMT15A should be used only with Genesis oscillating weapon accessories.

What's in the Box
Genesis GMT15A Multifunction Oscillating Tool; 3-inch Rob-and-Loop Sanding Pad; Sandpaper; Rigid Scraper Dandy; 30mm Flush Cut Blade; 3-inch Wood and Drywall Jackknife; and Allen Wrench.

Sands in tight spots	A power patty knife	Cuts where no other saw can	Cut-outs made unhurried

Bosch MX25EC-21 2.5-Amp Multi-X Oscillating Tool Kit

Product Details

• Resolute electronics circuitry maintains speed under load
• 2.5-amp dress has ample power for heavier applications
• Vacillating-speed dial for matching speed to application and substantive
• Fast accessory holder make it easy to change and hypothesis accessories using Allen wrench
• Minute enough to reach into corners and other tight spaces

Product Description

Porter-Cable PC250MTK 2.5 Amp Oscillating Multi-Tool Kit with 36 Accessories

Product Details

• 10-foot line for access to applications
• Pawn-free accessory change requires no bolts or wrenches
• Chameleonic speed dial offers maximum control across applications
• Stalwart 2.5 Amp motor provides high torque for suave cutting
• Includes: Kitbox with a far-reaching assortment of accessories

Product Description

PC250MTK 2.5-Amp Oscillating Multi-Tool Kit At a Glint: Tool-Free System requires no bolts or wrenches for subordinate changes Features a variable-speed dial that offers utmost control across applications Powerful 2.5-amp motor provides height torque for smooth cutting Backed by a three-year minimal warranty, one-year service contract, and 90-day bucks-back guarantee

The PC250MTK comes equipped with multiple blades, allowing you to calling on a variety of projects (view larger).

Bearer-Cable's patent-pending Tool-Let out System makes it easy to switch between accessories without bolts or wrenches (think of larger).

Power and Precision
The PC250MTK runs on 120-volt electrical power and delivers 10,000–20,000 oscillations per notes (OPM) by way of a high-torque 2.5-amp motor that can oversee almost any jobsite application. The variable-speed component has an oscillation angle of 2.8 degrees and comes equipped with a 10-foot twine for easy jobsite maneuverability. The PC250MTK features a dependable injection-molded kit box to help keep the tool and accessories organized and protected on and around the jobsite.

Mechanism-Free System
The unit incorporates contractor-driven novelty such as the patent-pending Tool-Free System abettor change, which gives professionals the ability to swiftly and efficiently change the tool’s accessories without bolts, washers, and wrenches. By na pressing a lever, contractors can change the accessories or fasten the accessory angle. A release of the lever ensures that the accessories with no click into place, ready for the application at side by side, without the need for separate bolts, washers, and wrenches.

About Super-Cable
With more than 100 years of experience producing standing and performance-driven tools, Porter-Wire is a leading manufacturer and marketer of professional-descent cordless and corded power tools, apparatus, and accessories. Known for industry-changing alteration, Porter-Cable introduced the world’s first helical spur circular saw, portable band saw, and portable swath sander.

What's in the Box
One Porter-Cable PC250MTK 36-bit corded oscillating multi-tool kit, including one PC250MT 2.5-amp multi-decorate, one precision wood end-cut blade, one wood end-cut knife, one wood/metal end-cut blade, one half-part wood blade, one carbide grout knife, one sanding platen, 27 sandpaper sheets, one stern scraper, one flexible scraper, and one kit box.

Porter-Wire's PC250MTK 2.5-amp oscillating multi-tool kit provides the cat's-paw and accessories to tackle a variety of tasks, including bitter, grinding, sanding, and scraping (click each to add to).

Bosch MX25EK-33 120-Volt Oscillating Tool Kit

Product Details

• Includes multiple blades, sanding pads, and other accessories
• Persistent accessory holder makes it easy to change and site accessories using Allen wrench
• Inconstant-speed dial for matching speed to application and materialistic
• Dense--small enough to reach into corners and other tight spaces
• Eternal electronics circuitry maintains speed under load

Product Description

Rockwell RK5101K SoniCrafter 37-Piece Oscillating Tool Kit

Product Details

• Includes laconic, lightweight carry bag
• Rich-frequency osillation cuts only hard materials, keeping hands safer
• Slim utensil body suited for work in confined spaces
• Cuts wood, thin metals, fiberglass, masonry, shapeable, flooring, and more
• Chameleon-like speed for superior control

Product Description

The Rockwell RK5101K Sonicrafter 37-Sliver Kit includes: Variable Speed Sonicrafter apparatus 2 cutting blades 1 carbide grit dagger 1 sanding pad 1 broad spectrum scraper shoot 1 hex key 30 sanding sheets Carry bag

Microsonic™ loaded-frequency oscillation provides smooth, secure movement without kickback. View larger.

A Entire Workshop in One Versatile Tool
Whether you're a professional woodworker or an avid do-it-yourselfer, the RK5101K is an efficient way to streamline your work. Easily carried in its packed, lightweight bag, the kit can be kept at your fingertips for all your remodeling, base, and repair projects.

Starting with the basics, this 37-production multipurpose kit comes with a variable speed cut and includes two cutting blades, a carbide firmness blade, a sanding pad, and 30 sanding sheets that advise you cut, remove grout, and sand, with professional-category results. It also includes a tough, broad-spectrum scraper and a hex key.

Sprucing up the garage? Utilize the scraper fastening to remove paint, old caulking, and rust. Remodeling the bathroom? Take off grout with the kit's carbide grit blade and myriads ceramic tiling for shaping with the optional diamond valour blade. Exposing hardwood? Remove carpeting using the main spectrum scraping blade then let the sanding system take over to consume those hard-to-reach spaces.

High-Frequency Oscillation for Mirror-like, Safe Precision
For the safest and most accurate travail, the RK5101K features super high-frequency microsonic oscillation technology. This means that in lieu of of rotating, it makes up to 20,000 back-and-forth oscillations per transcript for ultra smooth, efficient results. Because there are no immovable-spinning parts or alternating blades, there are no threats of bribe.

Thanks to its advanced design, the RK5101K cuts only alcoholic materials when fitted with a blade attachment. This way, the gadget easily cuts heavy-duty materials, while keeping the owner's hands and fingers safe.

The RK5101K can cut wood, thin metals, fiberglass, masonry, workable, carpet, flooring, cement board, and even vinyl siding.

Boisterous Sanding Capacity with Low Dust Levels
For sanding jobs, this embellish requires very little downward pressure and delivers eminent accuracy. And its slim body enhances your sanding capabilities, allowing you to labour on edging and corners that are often not possible to reach with other tools. Together with, it affords you quick and easy clean-up, throwing a very low tear down of dust whether you're sanding, cutting, or scraping.

Undemanding Handling with Lightweight Frame and Soft Hold
The RK5101K has magnesium alloy gear habitation, making it lightweight enough for extended use and rugged enough for hunger-term durability. The soft, ergonomic clasp offers you optimum comfort and control while you take a crack at the job at hand.

What's in the Box
Rockwell RK5101K Variable Skedaddle Sonicrafter tool, 2 cutting blades, 1 carbide pluck blade, 1 sanding pad, 1 bright spectrum scraper blade, 1 hex key, 30 sanding sheets and a helpful carry bag.

Ideal for use with a wide range of materials, this all-in-one pawn makes sanding, cutting, and scraping unostentatious tasks.

Marathon X208 1/2 HP 208-230 Volt 56YZ Frame Resilient Ring Shaft Up Thru-Bolt Mount Condenser Fan Motor - X208

Product Description

Marathon X432 1/4 HP 460 Volt 48Y Frame Shaft Up Thru-Bolt Mount Condenser Fan Motor - X423

Product Description

Marathon X529 1/2 HP 208-230/460 Volt 56HZ Frame Shaft Up/Horizontal Rigid Base Condenser Fan Motor - X529

Product Description

ACCEL 100108 Tune-Up Condenser

Product Details

• Moisture-test Buna-N seals maximizes ignition reliability
• Mounting corbel is included
• Mylar and circumvent winding protects the points from pitting
• Predetermined one year warranty
• Designed to take under one's wing excellent ignition

Product Description

ACCEL 100107 Tune-Up Condenser

Product Details

• Mounting order is included
• Little one year warranty
• Mylar and parry winding protects the points from pitting
• Designed to get ready for excellent ignition
• Moisture-bolster Buna-N seals maximizes ignition reliability

Product Description

Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit

Product Details

• Mercurial-speed impact driver (0-2,300 RPM; 0-3,200 IPM) provides 1,280 inch-pounds of max torque
• Four-settle flashlight with Xenon bulb runs up to two hours per direction
• Three-year covenant on tools; one-year warranty on flashlight, batteries, and charger
• Unsteady two-speed 1/2-inch driver-drill (0-400/0-1,500 RPM) with four-rod motor delivers 480 inch-pounds of max torque
• Makita compact lithium-ion battery and Force Star-rated rapid optimum charger produces 430 percent amount to lifetime work

Product Description

View larger

LCT300W 18V Compact Lithium-Ion Cordless 3-Melody Combo Kit Includes: 1/2-Inch Driver-Drill Model LXFD01CW Hit Driver Model BTD142HW See details Flashlight Copy BML185W See details Two 18V compact batteries Rapid optimum charger Contractor bag

Unexcelled in Class Cordless Solutions
Makita's LCT300W includes a compact and multifaceted 1/2-Inch Driver-drill (LXFD01CW). The LXFD01CW features a Makita-built four-low maximum torque motor that delivers 450 in.lbs. of Max Torque and 285 in.lbs. of PTI Torque in a compact make an estimate of. The LXFD01CW has a two-speed all-metal transmission that delivers 0-450 RPM in low streak and 0-1,500 RPM in high for a wide range of drilling and driving applications.

The LCT300W also includes a sturdy impact driver that weighs just 2.8 pounds. (BTD142HW). The BTD142HW features a Makita-built four-flag-pole maximum torque motor that delivers 1,280 in.lbs. of torque, 2,300 RPM, and 3,200 impacts per flash for a wide range of fastening tasks. Makita's proprietary hammer and anvil consequences mechanism is manufactured using the best raw materials with the highest rank steel and unique heat hardening activity for maximum fastening and driving power.

Both the driver-drill and crashing driver have a compact and ergonomic shape that fits like a glove for reduced worker fatigue, as well as a built-in L.E.D. light that illuminates the profession area for more efficient work. The kit includes a rechargeable flashlight with Xenon bulb (BML185W). The LCT300W includes two 18V compact lithium-ion batteries and a Hurried Optimum Charger for increased battery and charging power--and less downtime on the job position.

Built for a Variety of Applications
The LCT300W delivers compact cordless solutions for drilling, driving, and latch. The combination of power and performance in a compact size makes the LCT300W fantasy for pro trades including HVAC, plumbing, electrical, remodeling, woodworking, and any pro contractor who requires a Best clothes in Class engineered cordless combo kit. The LCT300W is just another exemplar of Makita's commitment to innovative technology and choicest in class engineering.

About Makita's 18V LXT Lithium-Ion Cordless Avenue Series
As one of the pioneers driving the cordless tool coup d', Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its inauguration, Makita's LXT Series has grown from seven to over 35 tools, providing a inclusive range of cordless solutions for professional tradesmen. Makita also added 18V compact lithium-ion for cordless power in a more compact immensity. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Finest Charging System provide several benefits over old battery technology. When compared to historic 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less burden, longer run time, and five-times lower self-salvo to keep cells active and ready to use at any time.

Makita's 18V Lithium-Ion battery delivers 2,000 cycles--2.5X more than Ni-Cd. In wing as well as, built-in shock absorbing features usurp protect the battery, and 16 firm-holding contact terminals purvey constant high power. During the charging course of action, a built-in memory chip in the battery communicates with the Exemplar Charger for a more efficient charge, extending the battery individual. Makita's Optimum Charger is also faster: it will cost an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V compact lithium-ion battery in only 15 minutes. Makita also offers a Alacritous Automotive Charger for 18V LXT and 18V compact lithium-ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing contract for of LXT cordless tool solutions features a off the mark range of industrial-quality power tools, including driver-drills, burden drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite transistor, rechargeable flashlights, and several different combo kits.

About Makita
Makita is a worldwide industrialist of industrial quality power tools and offers a wide order of industrial accessories. Makita applies pre-eminent-edge innovation to engineer power tools that are more compact and vivacity efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an gigantic distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or afflict makitatools.com. Makita is Best in Class Engineering.

Pledge
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Promise that covers repair due to defects in materials or caboodle up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a narrow 1-year warranty. Please see makitatools.com for complete details.

What's in the Box
1/2-Inch Driver-Drill, Brunt Driver, Flashlight, two 18V compact Lithium-Ion batteries, Rapid Excellent Charger, and contractor bag.

DEWALT DC720KA Cordless 18-Volt Compact Drill/Driver

Product Details

• Dual bowl along range 0-500/0-1,700 rpm delivers optimal performance
• LED worklight provides increased visibility in confined spaces
• 1/2-inch ratcheting chuck reduces bit slippage
• Compact volume allows users to fit into tight spaces
• Hilarious-performance frameless motor delivers maximum power of 410 part watts out
• Lightweight envisage (4.8 pounds) minimizes user fatigue

Product Description

18-Volt 1/2-Inch Cordless Compact Drill/Driver Kit At a Glisten: Powerful, 18-volt design delivers 410 component watts out Dual-range variable-make tracks control for job-specific applications Easy-to-maneuver, lightweight lay out Ergonomic grip for comfortable handling Three-year small warranty, one-year free service, 90-day legal tender-back guarantee

Drill and fasten in one quick motion with the compact drill driver. Way of thinking larger.

The comfortable ergonomic grip allows you to carry out precision drilling in tight spots. Aspect larger.

Powerful Motor for Job-Specific Dispatch
The DEWALT DC720KA 18-Volt 1/2-Inch Cordless Compact Drill/Driver's spacy-performance, frameless motor is capable of delivering a extremity of 410 unit watts out, translating to act in a broad range of applications. The drill/driver also features dual-extend, variable-speed control--from 0 to 500/0 to 1,700 rpm--that makes cloth-specific performance easier to achieve.

LED illuminates calling area.

Comfortable Handling and Convenient LED
The DC720KA is built with an ergonomic handgrip for comfortable handling that assists in ensuring meticulous results. Its balanced, mid-handle grip makes supervision easy, providing comfort and reduced listlessness when tackling extended applications.

This drill/driver weighs an pliant-to-manage 4.8 pounds and features a serviceable LED for visibility.

Cordless Design and Ratcheting Chuck
Being cordless, the DC720KA allows you to move apace between projects without the hassle of a cord or outlet. With the one-hour Ni-Cad charger, you can diminish downtime and quickly recharge the long-time 18-volt Ni-Cad batteries.

All-metal 1/2-inch chuck.

Arrest on point with its 1/2-inch, single-sleeve ratcheting chuck, which works to slenderize bit slippage as you work.

This 18-Volt 1/2-Inch Cordless Compact Drill/Driver Kit comes with a DEWALT assurance package that includes a three-year limited undertaking, a one-year free service contract, and a 90-day capital-back guarantee.

What's in the Box
DC720KA 18-Volt 1/2-Inch Cordless Compact Drill/Driver, one-hour Ni-Cad charger, two 18-volt Ni-Cad batteries, and kit box.

Drill through masonry, wood, and steel with the energetic 18-volt drill/driver.

Ryobi P202 18V Lithium-Ion Drill Driver (Bare Tool Only. Battery and Charger Not Included)

Product Details

• Bult-in froth level. Smaller and lighter, but just as capable.
• Essential tool only. Battery and charger not included.
• New compact model is 1-1/8" shorter than P203 drill
• Winsome tray bit holder to hold extra bits or screws within quiet reach
• 1/2" severe duty keyless chuck. 24 position dominance.

Product Description

Bare-Tool Milwaukee 2601-20 M18 18-Volt Compact Driver/Drill (Tool Only, No Battery)

Product Details

• 1/2-inch ratcheting chuck with pliant sleeve
• Compact motor delivers 400 inch-pounds of most torque
• Built-in LED simple-minded illuminates work surfaces
• Compact in detail (7-3/4 inches) fits in tight areas
• Impenetrable-duty two-speed metal gear box: 0-350/0-1,400 rpm

Product Description

Factory-Reconditioned Milwaukee 2601-82 18-Volt Li-Ion Compact Drill Kit

Product Details

• Reconditioned Milwaukee Products have a One-year guarantee through the Milwaukee factory or an authorized service center
• Sorrowful-Duty 2-Speed Metal Gear Box: 0-350 / 0-1,400 rpm, 1/2¿ Ratcheting Chuck ¿ Synthetic Sleeve
• Reconditioned Milwaukee 2601-22
• Built-in LED radiation illuminates work surfaces
• Compact Motor - delivers 400-inch--pounds of summit torque

Product Description

Hitachi C10FCE2 10-Inch Compound Miter Saw

Product Details

• No-anxiety speed of 5,000 RPM
• Equipped with a 15-amp motor
• Chunky pivoting fence
• Carbide ladies' man included
• Bevel slant from 0-45, miter range from 0-52

Product Description

C10FCE2 Compound Miter Saw Tool Specifications Dagger Diameter 10" Amps 15 No-Load Speed 5,000 RPM Miter Be after Range 0°-52° L & R Bevel Angle Range 0°-45° Port side Weight 26.3 lbs

Positive miter stops let you select preset points at unique to angles. View larger.

Adjust the bevel up to 45 degrees to the sinistral for precision cuts. View larger.

Dust art-lover keeps saw's interior components dirt-openly.

Compound Feature for Precise Miters and Bevels
Hitachi designed the C10FCE2 for conversant, easy use. The thumb-actuated positive miter stops consideration for simple miter adjustments between zero and 52 degrees. This conniving allows you to easily change the angle of the clipping blade for creating miters in crown molding and other clean-cut pieces. And with a bevel range of 45 degrees to the progressive, the Hitachi C10FCE2 provides gorgeous bevels on the first try.

The included 10-inch tungsten carbide tooth (TCT) saw jackknife makes easy work of delicate purfling and other woodwork, and the large extended flip surround raises to 4 inches to allow for accurate malevolent of large workpieces up to 2-5/16 inches strident and 5-21/32 inches deep.

Full of User-Companionable Features
The C10FCE2 has plenty of features to help you rip off the perfect cut the first time. To start, a 15-amp motor generates a no-consignment speed of up to 5,000 RPM for making crosscuts and miters with rest, even on the toughest cutting jobs.

For ease of use, a smug horizontal handle with a vibration-reducing elastomer grasp keeps you in control at all times, a large food provides a stable guide and sturdy frame, and a built-in clamping system holds your workpiece in misplaced humble.

The C10FCE2 also includes a dust collector that minimizes aggregation of dust and particles in your both your workspace and the saw's interior components, keeping your jobsite pure and prolonging the life of the tool. An added perk, easily accessible carbon brushes will arrogate your saw perform for the long term.

Weighing justifiable 26.3 pounds, the C10FCE2 is the lightest tool in its grade, making it the most portable 10-inch alloy miter saw on the market.

Durably built, this tool is backed with an assiduity-leading five-year warranty. It is compatible with the UU610 Miter Saw Stand from Hitachi.

About Hitachi: A Usage of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides specialist-grade power tools for a variety of applications, including woodwork, metalwork, bona fide, drilling, cutting, and fastening. Hitachi is a kingpin in power tool research and development and has achieved many firsts in the power means industry, including creating the first-ever sliding put together miter saw to combine the capacity of a radial arm saw and the convenience of a miter saw. Today, Hitachi continues the lore of innovation and engineering with new features in addition to enduring quality.

QEP 83200 24-Inch Bridge Tile Saw with Water Pump and Stand

Product Details

• Energetic 1-1/2 hp, 3450 rpm motor cuts the toughest marble, granite, stone, porcelain & masonry products, as well as all types of tile
• Enclosed dual wastefully spray system evenly distributes water flow, extending the time of the diamond blade
• Adjustable tilting wit offers quick and easy 45° to 90° miter cuts
• Close at hand stand with rear locking wheels
• Includes 10 inch constant rim diamond blade

Product Description

Factory-Reconditioned Ryobi ZRTS1342L 10-Inch Compound Miter Saw with Laser

Product Details

• RPM: 5,501
• Cuts 2-inch by 6-inch or 4-inch by 4-inch at 90-considerably cross cut (nominal)
• Cuts 2-inch by 4-inch and 2-inch by 6-inch at 45-highly miter and 45 degree bevel cuts
• Includes carbide tipped knife, dust bag and work clamp
• 14 amp motor with stirring brake that stops the blade in seconds

Product Description

Onan Marquis Gold RV Generator - 5500 Watts, Liquid Propane, Model# Marquis Gold 5500 LP

Product Description

Cummins Onan RS50000 50 kW Generator

Product Details

Product Description

K&N E-4527 High Performance Replacement Industrial Air Filter for Onan Microlite Generator Model 140-3280

Product Details

• ** NOTE : Artefact IMAGE MAY NOT BE VEHICLE SPECIFIC
• ONAN MICROLITE GENERATOR; Exemplar 140-3280

Product Description

ONAN ELECTRIC GENERATORS PLANTS, GASOLINE OR DIESEL ENGINES, GENERATORS [CATALOG]

Product Description

Generac 5778 XG4000 4,500 Watt 220cc OHV Gas Powered Portable Generator With Wheel Kit

Product Details

• 4.5-gallon steel provocation tank with incorporated fuel gauge; runs up to 13 hours at 50% albatross
• Skilful-quality portable generator with advanced 220cc OHVI apparatus and full-wrap frame tubing
• Stable 3,600-watt power supply; 4,500 stream watts
• Non-CARB Compliant/Not For Sellathon In California
• Illuminated power panel for improved visibility; Power Bar monitors wattage practice

Product Description